November | 2008 | -= 21v10 =-

Archive for November, 2008

DMA reverts to PIO

November 20, 2008

Quick solution

If you’re not interested in the details, but just want to fix this problem as quickly as possible:

1. Created a new text file and paste the information below into this file. Rename the file to resetdma.vbs
2. Run resetdma.vbs
3. Despite any warnings click on the [Open] or [Execute] buttons as required to execute the file resetdma.vbs. (If you fear that this web site could be malevolent, you can use the manual method instead, which is described below. Or you could download, save, and inspect the program with an editor like the Windows Notepad. It is a script text file.)
4. If the program found any ATA channel to reset, reboot your computer and test all drives.
5. If the problem is still not solved, set the offending channel to PIO manually, reboot your computer, set the channel back to DMA, and reboot again.

resetdma.vbs

‘ Visual Basic Script program to reset the DMA status of all ATA drives

‘ Copyright © 2006 Hans-Georg Michna

‘ Version 2007-04-04

‘ Works in Windows XP, probably also in Windows 2000 and NT.
‘ Does no harm if Windows version is incompatible.

If MsgBox(“This program will now reset the DMA status of all ATA drives with Windows drivers.” _
& vbNewline & “Windows will redetect the status after the next reboot, therefore this procedure” _
& vbNewline & “should be harmless.”, _
vbOkCancel, “Program start message”) _
= vbOk Then

RegPath = “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\”
ValueName1Master = “MasterIdDataChecksum”
ValueName1Slave = “SlaveIdDataChecksum”
ValueName2Master = “UserMasterDeviceTimingModeAllowed”
ValueName2Slave = “UserSlaveDeviceTimingModeAllowed”
ValueName3 = “ResetErrorCountersOnSuccess”
MessageText = “The following ATA channels have been reset:”
MessageTextLen0 = Len(MessageText)
ConsecutiveMisses = 0
Set WshShell = WScript.CreateObject(“WScript.Shell”)

For i = 0 to 999
RegSubPath = Right(“000” & i, 4) & “\”

‘ Master

Err.Clear
On Error Resume Next
WshShell.RegRead RegPath & RegSubPath & ValueName1Master
errMaster = Err.Number
On Error Goto 0
If errMaster = 0 Then
On Error Resume Next
WshShell.RegDelete RegPath & RegSubPath & ValueName1Master
WshShell.RegDelete RegPath & RegSubPath & ValueName2Master
On Error Goto 0
MessageText = MessageText & vbNewLine & “Master”
End If

‘ Slave

Err.Clear
On Error Resume Next
WshShell.RegRead RegPath & RegSubPath & ValueName1Slave
errSlave = Err.Number
On Error Goto 0
If errSlave = 0 Then
On Error Resume Next
WshShell.RegDelete RegPath & RegSubPath & ValueName1Slave
WshShell.RegDelete RegPath & RegSubPath & ValueName2Slave
On Error Goto 0
If errMaster = 0 Then
MessageText = MessageText & ” and ”
Else
MessageText = MessageText & vbNewLine
End If
MessageText = MessageText & “Slave”
End If

If errMaster = 0 Or errSlave = 0 Then
On Error Resume Next
WshShell.RegWrite RegPath & RegSubPath & ValueName3, 1, “REG_DWORD”
On Error Goto 0
ChannelName = “unnamed channel ” & Left(RegSubPath, 4)
On Error Resume Next
ChannelName = WshShell.RegRead(RegPath & RegSubPath & “DriverDesc”)
On Error Goto 0
MessageText = MessageText & ” of ” & ChannelName & “;”
ConsecutiveMisses = 0
Else
ConsecutiveMisses = ConsecutiveMisses + 1
If ConsecutiveMisses >= 32 Then Exit For ‘ Don’t search unnecessarily long.
End If
Next ‘ i

If Len(MessageText) <= MessageTextLen0 Then
MessageText = “No resettable ATA channels with Windows drivers found. Nothing changed.”
Else
MessageText = MessageText & vbNewline _
& “Please reboot now to reset and redetect the DMA status.”
End If

MsgBox MessageText, vbOkOnly, “Program finished normally”

End If ‘ MsgBox(…) = vbOk

‘ End of Visual Basic Script program